<form id="p17fj"></form>
        <thead id="p17fj"></thead>
        當前位置:網站首頁>沙金設備產品展示 > 移動式砂金設備 > 巖金礦砂金車 >巖金礦提取方案每小時15噸處理量

        巖金礦提取方案每小時15噸處理量

        流程概述:

        原料通過工程車輛送入進料斗中,然后通過振動給料機送入一臺鄂式破碎機內進行破碎,破碎后的物料通過上料輸送機均勻送入滾筒式洗石機內進行清洗篩分為粗料與細料兩種規格。

        6mm以下細料進入一臺80#選金離心機進行精選,廢料排入廢料池中;6mm以上粗料進入一臺巖金礦專用制沙機內進行破碎制沙,然后進入一臺棒磨機進行棒磨,棒磨后的細料排入盛料箱內通過沙泵打入2臺跳汰機內進行篩選回收,廢料排入廢料池中。

        廢料池中的細沙通過沙泵進入一臺細沙回收機內進行脫水回收,然后通過成品料輸送機輸送至指定區域。


        Technological Process

        Raw material from feed hopper getting into shaking feeder,then move into Jaw-type crusher to be crushed while going through trommel washing machine to be separated into 2siezes≦6mm or≧6mm

        The smaller size materila(≤6mm) flow into 80#centrifugal concentrator for further separation,the scap material washed to waste pool.The bigger size material(≧6mm)then go through specialized sandmaking machine of rock mine to be crushed into sands to be collected,the others material getting into ball mill then wahed into 2sets of Jigging machine from sand pump for further separation,the material getting rid to the waste pool.

        The sands in the waste pool can be recovered from sand recover machine getting rid of the water,then shipped by conveyor to destination.

        技術參數:

        名稱  Productions

          規格  Model&Size

        功率  Power

        數量
        Quantity

        進料斗
        Feed hopper

        3500*2980,10mm厚鋼板steel,12#槽鋼U-steel


        1set

        給料機Feeder

        振動給料機 shaking feeder

        15

        1set

        鄂式破碎機Jaw crusher

        2500*400mm

        15

        1set

        上料輸送機conveyor

        皮帶寬度600,桿長16米
        Belt width600,length of the Pole 16m

        7.5

        1set

        滾筒洗石機
        Trommel washing machine

        ?1000,長度3000mm
        Diameter1000,length3000mm

        7.5

        1set

        巖金礦專用制沙機
        Specialized sandmaking  machine of rock mine

        800*800mm

        75

        1set

        棒磨機
        Rod mill

        2100*3000mm

        180

        1set

        跳汰機
        Jigging machine

        JT5-2

        7.5*2

        1set

        離心機
        Centrifugal concentrator

        80#手動排礦

        11

        1set

        6S搖床
        shaking table

        3000*1620*1360mm

        2.2*4

        1set

        細沙回收機
        Recovery machine


        30.75

        1set

        成品料輸送機
        Conveyor

        皮帶寬度600,桿長11500mm
        Belt width 600,Pole length11500mm

        5.5

        1set

        沙泵
        Sand pump

        4inch

        30

        1set

        水泵
        Water pump


        7.5

        1set

        水泵
        Water pump


        3

        1set

        離心泵
        Centrifugl pump


        5.5

        1set

        離心泵管道
        Pipe of centrifugal pump



        30m

        水泵管道
        Pipe of water pump



        3pcs

        離心機進料管道
        Feeder of Centrifugal concentrator

        鋼絲軟管
        Wire braided hose


        10m

        配電柜
        Distribution cabinet 



        1set

        發電機組
        Generator unit

        200KW


        1set

        發電機組
        Generator unit

        300KW


        1set

        離心泵機組
        Centrifugal pump

        柴油機+離心泵
        Diesel motor and centrifugal pump
        流量Water flow:200m3/h
        揚程Discharging distance:282m
        不含管道


        1set

        離心泵機組管道
        Pipe for centrifugal pump

        鐵制或鋼絲管道
        Iron or wire braided hose


        4000m

        總功率Total power

        411.55KW

        產品分類

        /PRODUCTS

        聯系我們

        /CONTACT

        全國統一咨詢熱線

        0536-3593111

        地址:青州市黃樓街道辦事處西建德村

        電話:0536-3593111

        傳真:0536-3593111

        手機:15053659999,15653473333

        Email:1592999333@qq.com

        版權所有:青州冠誠重工機械有限公司 魯ICP備09020970號-47
        超碰caoporen国产最新地址